Don’t panic if you can’t turn on your iPhone because it is in DFU mode. On iOS 16 and iPad OS 16, we’ll talk about how to fix an iPhone that has become trapped in DFU mode. When your iPhone becomes trapped in DFU mode and you can’t seem to get it out, it can be a big pain.
You can upgrade or restore your device’s firmware when it is in DFU mode (Device Firmware Update) without using iTunes. Your iPhone won’t switch on if it becomes stuck in DFU mode; instead, you’ll see a black screen with the white iTunes logo. In this post, we’ll demonstrate how to use UltFone iOS System Repair to fix an iPhone that has become stuck in DFU mode on iOS 16 or iPad OS 16.
Does iPhone DFU Mode Damage it?
No, using DFU mode won’t harm your iPhone. In fact, if your gadget is giving you problems, it might be a useful debugging tool. Device Firmware Update mode is referred to as DFU mode. You may upgrade the firmware on your iPhone without using iTunes by putting it into DFU mode. This can come in handy if your iPhone won’t sync with iTunes or if you want to downgrade to an earlier version of iOS. Despite the fact that DFU mode can be beneficial, it should be noted that there is some danger involved. When you use DFU mode, you’re avoiding iTunes, so if something goes wrong, you run the risk of permanently damaging your iPhone. However, as long as you exercise caution and carefully follow the instructions, you ought to be able to safely use DFU mode on your iPhone.
Why won’t the iPhone 8/X/XR/XS/11 come out of DFU Mode?
Your iPhone 8/X/XR/XS/11 potentially remain in DFU mode for a variety of reasons. An issue with the programme is one of the most frequent causes. This can occur when you try to restore your smartphone from a backup or when updating to a new version of iOS and anything goes wrong. Hardware problems, such as defective batteries or a damaged charging port, are some other frequent causes. You can attempt a few solutions if your iPhone 8/X/XR/XS/11 is stuck in DFU mode and won’t power on.
How to Remove iPhone 11 from DFU Mode without Data Loss:
UltFone iOS System Repair can be used to safely and quickly fix an iPhone 11/XS/XR/X/8 that is stuck in DFU mode. This programme is made to assist you in resolving a variety of iOS issues, such as an iPhone stuck in DFU mode. One of the most well-known and efficient iPhone data recovery tools is UltFone iOS System Repair, which can help you quickly restore iPhone 11/XS/XR/X/8 stuck in DFU mode without erasing any data. To use this software, follow these 3 easy steps: connect your device, choose recovery mode, and begin the process. Additionally, UltFone iOS System Recovery works with all models of iPhone, iPad, and iPod touch, so compatibility problems are unaffected.
UltFone iOS System Repair is also very simple to use. You may utilise it without any issues even if you are not very tech-savvy. Therefore, don’t be hesitant to try UltFone iOS System Repair if your iPhone is stuck in DFU mode.
Step 1: Launch the programme, then select “iOS System Repair” from the Start menu to begin fixing all iOS issues. Connecting your gadget to the system is important.
Step 2: Select the mode you want to utilise in the following interface to continue the procedure. Without destroying data, Standard Repair can fix an iPhone that is stuck in DFU mode.
Step 3: A firmware package will need to be downloaded to your computer. The programme will instantly identify the iOS version and offer the appropriate firmware for the iPhone. As the package downloads to the computer, wait. After downloading the firmware, you can begin fixing the gadget. The correction will take some time to complete.
How Can I Force Recovery Mode From DFU Mode?
Utilizing a tool like UltFone iOS System Repair is the most straightforward approach to putting your iPhone into DFU mode. Without any technical expertise, you can easily turn your iPhone into DFU mode with this app. However, here’s how you attempt to accomplish it yourself:
Make sure your iPhone is switched off first. Hold the Sleep/Wake button down if it isn’t until the “Slide to Power Off” slider shows. Once your iPhone is off, use a Lightning cable to connect it to your computer.
Next, simultaneously press and hold the Home and Sleep/Wake buttons. Until the Apple logo appears on your screen after around 10 seconds of holding both buttons down, continue to do so.
Release the Sleep/Wake button after the Apple logo shows, but keep holding down the Home button. Your computer should display the message “iTunes has detected an iPhone in recovery mode” a short while later. Your iPhone will now be in DFU mode if you let go of the Home button.
How to Enter and Exit DFU Mode on an iPhone X
Due to additional gestures made possible by the Home button, entering and exiting DFU mode on an iPhone X differs differently from prior models. What you should know is as follows.
Activating DFU Mode:
Utilize a Lightning cable to link your iPhone to your computer.
If iTunes doesn’t launch automatically, open it.
For 8 seconds, simultaneously press and hold the Volume Down and Sleep/Wake buttons, then let go of both.
While holding the Volume Down button for a further 5 seconds, press and hold the Sleep/Wake button. You’ve held the buttons for too long and must restart at step 3 if the Apple logo shows.
Your iPhone should now display a black screen, indicating that it is in DFU mode. iTunes will now recognise your device.
Exiting DFU Mode
For 8 seconds, simultaneously press and hold the Volume Down and Sleep/Wake buttons, then let go of both.
When the Apple logo appears on your screen, press and holds the Sleep/Wake button until it does. Then let go of the button. Your iPhone will restart, putting you back in regular mode.
Congratulations, you’ve now mastered one of the most crucial recovery tools for your iPhone X!
How to Use iTunes to Restore an iPhone in DFU Mode (Data Loss)
You may restore your iPhone in DFU mode using the strong tool that is iTunes. You should make a backup of your data before starting this process because it will destroy all of your data from your device. This is how you do it:
Open iTunes and connect your iPhone to your computer using a Lightning cord.
By adhering to the directions in the previous section, you can put your iPhone into DFU mode.
When iTunes discovers your iPhone in DFU mode, it will show a message stating that it has discovered an iPhone in recovery mode.
To start the restore procedure, click the “Restore” button. Make sure you have a backup of your data before starting this because it will erase everything from your device.
Your iPhone will reboot and return to factory settings after the restoration procedure is finished.
How to Resolve an iPhone Stuck in Recovery Mode Following an iOS 16 Update Failure?
To bring your iPhone out of recovery mode, you can try a few different ways. Try rebooting your iPhone first. If you’re still having issues, you can get assistance from Apple Support. They will typically be able to guide you through the iPhone repair process. But if your phone has significant damage, they might advise you to get a new one. In either case, don’t give up because you should be able to fix your iPhone with a little labour.
Conclusion
On iOS 16, there are several ways to attempt and fix an iPhone that is stuck in DFU mode. These include employing a professional iOS repair tool, updating your iPhone’s software, or doing a device restore through iTunes. UltFone iOS System Repair is a simple, reliable method for removing your iPhone from DFU mode without losing any data. You don’t need any technical knowledge to swiftly fix iPhone issues with this robust programme. Simply download and set up the programme on your computer, then proceed through the on-screen prompts to begin using it. So don’t put it off any longer and try UltFone iOS System Repair now!
